Your cart is empty.
Your cart is empty.3.5 out of 5 stars
- #56,951 in Automotive (See Top 100 in Automotive)
- #787 in Automotive Decals
★ Since the sticker is rolled up during packaging, when you receive the product, you will see bubbles in the transfer membrane, but the sticker is intact, it will not have any impact on your stickiness and effect. After the sticker is finished, the transfer membrane needs to be removed.
▲ |INSTALLATION DETAILS|
1. After cleaning the car to remove dust, spray water on the car to reduce the viscosity of the sticker.
2. After removing the bottom paper of the sticker, spray more water on the side of the sticker with glue to reduce the viscosity, which is convenient for adjusting the position and removing bubbles.
3. After sticking the sticker on the car body, lift the sticker on one side and scrape it slowly from the other side with the card, while scraping the bubbles while adjusting the position of the sticker until the entire sticker is scraped.
4. After scraping off the air bubbles, wait for the water in the sticker to dry before removing the transfer membrane.
5. The extra stickers at the door and the seam can be cut off with a knife.
ps: Due to the large size of the sticker, two or more people can work together to complete the sticker.
` SPECIFICATIONS:
Package includes: 2x Mountain car stickers.
Material: Vinyl sticker.
Color: Black / White.
TIPS:
▶ Do not wax the car one week before using the sticker. The wax will make the sticker not sticky.
▶ Do not wash your car within one week after filming. It is best not to expose it to exposure within 24 hours.
NOTE:
1. Due to manual measurement, please allow a deviation of 1-3 mm.
2. During photographing, there may be slight color difference due to other factors such as light and environment.
3. If you find any problems, please leave us a message and we will answer your questions.
Natalie
Reviewed in the United States on May 5, 2025
Vinyl is very thin. So much that this is easy to screw up and not work. Make sure you go slow and tape it down first
Customer
Reviewed in the United States on May 3, 2025
Details weren't as crisp on edges. Decal easily ripped. Waste of money.
Adam Németh
Reviewed in Germany on March 5, 2025
0% das ist einfach ein quatsch
Thrifty Savers
Reviewed in the United States on March 17, 2025
This product sucks! The adhesive is subpar! The next day after installing I went to rub out a few spots and huge sections peeled right off! Keep in mind I cleaned surfaces with alcohol first, used soapy water to install and let sit appropriate time before stripping plastic off. These would have came right off in a car wash!!! I asked for a refund and have to send these back…what?, OK! Why would the want a wadded up ball of a decal and want to pay the shipping for it? Ok, I’m shipping it back but they should have just refunded me! What about the hours it took to put these on? and off! Horrible way to do business!!!
Brad B.
Reviewed in the United States on February 4, 2025
This worked out great for a little extra flair on a camper. I still have some air bubbles under mine, but could have done better if I’d taken a little more time in applying. I’m betting it will settle in the summer sun anyhow. Overall, totally satisfied with the product and quality.
RICK
Reviewed in the United States on January 29, 2025
I like the look that this graphic gives my car. It is now more distinguishing from ALL the other white cars in parking lots. I may add a graphic to the tail gate next, we'll see. I have read several reviews that complain of the "poor graphic detail," and the trees lack life like sharp edges. That is done for several reasons. Sharp pointed detail will make the graphic more suseptible to peeling off, because those fine details will be more sesseptable to start peeling off. The more rounded edges also help aid the novus in the installation and allows a person to peel the paper backing off of the graphic easier. Once you have the occasion to do this install you will understand what I mean. If you are installing this on a totally flat or slightly rounded surface it will be an easy install. My install was a much more difficult install because of the many different angled body lines I had to work with. The fact that this graphic was NOT a solid peace of vinyl made this possible on my body style. Only time will tell if it will hold up over time. I did use a heat gun to warm the graphic to help the glue soften so it could stick better where my garage was only about 50 degrees at the time, yesterday. The heat gun was only used after the clear backing was removed and to also accelerate the drying process. FYI, I have had some experience with smaller graphics but this was the largest I have ever done and very pleased how it turned out and how it looks.
Tom k.
Reviewed in the United States on January 16, 2025
It takes some finest to apply as you have to first clean the surface of dirt, oil and grimes with alcohol then spray the surface with water to easily move and adjust the decals, use a squegee to remove any air pockets then you must slowly peel off the clear protective film!
AverageAMZBuyer
Reviewed in the United States on April 5, 2025
Matches Perfectly on my Pilot Trailsport
Bernhard
Reviewed in Germany on April 29, 2025
Der Artikel war nicht gut bei aufkleben sind resseentstanden
Drew
Reviewed in the United States on September 20, 2024
The decal is not properly adhered to the clear covering making creases and imperfections likely. I would only recommend the wet installation method and taking your time but for less than $30 it turned out looking and working just fine for what I needed.
mark
Reviewed in Canada on November 24, 2024
look good and very easy to put on if you use soap and water
Recommended Products
