Shopping Cart

Your cart is empty.

Your cart is empty.

Grips Grip Cover - Fits from 1.45in. to 1.65in. O.D. - 4.25in.L MC403

Free shipping on orders over $29.99

$15.44

$ 7 .99 $7.99

In Stock

About this item

  • Slip over existing grips for greater comfort
  • Work with heated or standard grips
  • Shock-absorbing EPDM foam for a smoother ride
  • Extra durable; ozone-, UV-, gas- and oil-resistant


Slip over existing grips for greater comfort
Work with heated or standard grips
Shock-absorbing EPDM foam for a smoother ride
Extra durable; ozone-, UV-, gas- and oil-resistant


Reggman
July 17, 2025
They really do help soften the rubber heated grips on Harley Davidson Black Rubber Heated Hand Grips Part Number 56100034. Keep in mind this does increase the diameter of the grip so if you have small hands you may not like these. I have medium sized hands and they feel great. I like them so much I've ordered two more to keep in my tool chest as replacements when these wear down over time. Another thing to watch out for is it tells you to spray hairspray and immediately slide these on. It's more of spray and then stretch and pull like your life depends on it to get them to slide on the grips I mentioned. Takes some effort, but they will go on. I made the mistake of using pliers on the clutch side to pull and ripped the foam a little. It just seemed a little harder on that side as that's where the heat knob is. Once you pull these on a bit then rotate them back and forth and pull and they will slide right on.
C. Heartwell
July 11, 2025
Grab On grips is a good example of a simple but excellent idea and product. I actually got these for a less conventional application, and they turned out to be excellent. Winter this year has been much milder than normal, so I've been riding a motorcycle to work frequently. Between the cold wind and the cold chrome grips my hands were hard to keep warm. I didn't want to invest a lot of money in electronically warmed gloves for just a couple months of use. Since half the problem was the cold grips I decided to try to wrap them and in my search for a solution I found these grip covers. My grips are large, so I ordered the largest diameter grab-ons and with a little stretching and pulling I got them on nice and tight. More importantly, they really do the trick. When the weather warms up I'll just take them off until next winter.
Allen L Carpenter
May 31, 2025
I used these to cover heated grips that had started to break down. They have workedperfectly. Great fit without making the grips so large they are uncomfortable.
R. Smith
May 7, 2025
These installed in about 30 seconds (used a compressor/air). I've installed these on other bikes and knew it was easy so I decided to give these a try on my 2012 Harley Ultra Limited. They went on easily and feel GREAT while riding. I think they're going to help with fatigue like the ones I put on my Goldwing several bikes/years back. I turned the heat on for a few minutes and could feel it through these grip covers, I was originally happy with this purchase, BUT...UPDATE: After Using these grips, it became apparent that my Harley would no longer start in gear. These grip covers are just thick enough that my clutch lever will not longer activate my clutch safety switch. I could glue a small piece of metal to the back of the clutch lever, but I don't thing that's a great idea. I've removed the grip covers for now. I really do like the feel of them, but don't think it's safe to only be able to start the bike if it's in neutral.
Les H.
April 27, 2025
Fits and works great.
lare e.
April 5, 2025
inside deminsions was to large I had to use one roll of black type wrap around on each grip to to get to proper size, at least it lessened the vibration I own a 2015 klr650
Gregg Smith
March 13, 2025
I've been using these grips for many years on many bikes. They slide right over the existing hard-rubber grips, giving a better feel, some cushion and better control.Just make up a solution of water with a few drops of dish soap, liberally coat the outside of the rubber grip and the inside of this slip-on grip cover and slide it on with the twisting motion.These grips can be trimmed it to length as well.Remember to let any liquids used during install dry completely before you take the motorcycle out for a ride.
George Kulczewski
January 4, 2025
Bought 2 sets (just in case) and they are wonderful! Put them on my Indian Roadmaster which has slightly small grips (a lot of people complain about this on that bike) and looked for something that would work and I found it. I installed these with no spray, soap or anything. Just slip them on a little ways and tap the outside with open palm and the air pressure makes them go on most of the way. Then I worked them with both hands twisting and pushing them the last bit until they lined up perfectly.
Recommended Products