Your cart is empty.
Your cart is empty.Stella R
July 25, 2025
Fit my A1013U perfectly. Installation was easy. Looked like it was well made and good quality.
Soundcheck
June 13, 2025
With this PCO air scrubber, I found a perfect replacement cell that I replace myself for the expensive name brand Air Scrubber installed by an AC contractor. The replacement took a matter of minutes. The thumbscrew mount on the base assembly locked into the slots on this unit perfectly. Next, I attached the 4-pin connector to the pins on the UV lamp, paying attention to the orientation. The UV lamp has quartz glass with a tungsten filament, which is supposed to yield a better service life.The price is reasonable, and installation is a breeze. If your scrubber a slotted mount and is about 9 inches long, this could be the correct replacement for you. When everything is back together, the little hole in the outer assembly housing shows a little purplish-blue dot to prove the UV light is on. It got me back into the air scrubbing business quickly without a service call. Recommended replacement.
clipper
March 10, 2025
I had an induct scrubber that pretty much self destructed, so decided to rebuild it with parts i had from other projects and this pco cell. Cell fits the cutout fine, powers up off my frankensteined controller, and air quality is a lot better than before everything went the way of the dodo. No clue if the pco effect on this is real as it is a non-ozone producing model, so can only speak to the effectiveness of the uv source. The way mine is installed, it more or less bathes the strip heaters and evap coil in uv to stop things like black mold and slime molds from growing. Since adding this and rebuilding the system, indoor air quality has dramatically increased. So I would say the uv is doing it's job. The original system was set to run 24/7, which is probably one of the things that led to shortened bulb life and the controller dying.. I have this one set to turn on any time the fan turns on, whether it is heating/cooling/circulating.I will probably add a second one of these now that I know how easy it is to piece together a driver for it, but the next one will be in between the blower and coils instead of in between coils and duct supply side. that way i am getting some extra action on the blower blades and the other side of the coils.
Ld S.
March 6, 2025
These bulbs are expensive items so I was very relieved that this was an easy, perfect replacement for my existing Air Scrubber. Once I put it in it lite up right away and the germs in my A/C system are dying as I write.
D. Leung
December 29, 2024
Solid product in shielded metal enclosure. Strong uvc light can shine only 2 sides for safe us. Removable 4 pin bulb - can plug in a standard ballast . 10' LONG X 3" WIDE enclosure Bulb is about 9"x 1".... fully ventilated honey combed grill around bulb.
Recommended Products