Your cart is empty.
Your cart is empty. 1. Commercial Grade Standard: This high pressure steam cleaner is manufactured with rigour and excellence to enable it to meet commercial grade standards, thus supporting it to work for long periods of time without overheating. Our recommended run time of 30 minutes is intended to allow the user to stop and check for clogged nozzles. If not, move on.
2. Long Lasting: This high pressure steam cleaner with integrated ABS carrying case can hold up to 300 lbs. The built in vaporizer and solenoid pump are made of 304 stainless steel for durability and will be with you for years to come.
3. 4ft Water Inlet Hose: This high pressure steam cleaner has a built in 4ft water inlet hose that plugs into an external drum as a water source to produce a continuous steady stream of steam.
4. High Power: This high pressure steam cleaner will be ready in 20 seconds, up to 230°F, using the power of 3.5 Bar pressurised steam to and clean oil and .
5. Solution Or Detergent Can Be Added: The excellent liner of this high pressure steam cleaner allows you to add a solution or detergent to the water supply to help you clean more cleanly. Two things to keep in mind are to make sure the solution is completely mixed. Secondly, clean the remaining solution from the machine after each use.
Spec:
Item Type: High Pressure Steam Cleaner
Material: ABS and Stainless steel
Water Consumption: 200-500 ML/Min
Air Pressure: 300-350KPa
How to Use:
1. Add appropriate water to the kettle and put the inlet pipe into the water
2. Plug in the washer
3. Press the washer switch and adjust the steam dry or wet according to your needs
4. Hold the spray and press the switch
Package List:
1 x High Pressure Steam Cleaner
1 x Stainless Steel Extension Nozzle
1 x Water Heater Cleaning Hose
1 x Misting Nozzle
1 x Large Bristle Brush
2 x Nylon Brush
2 x Copper Brush
2 x
2 x Rubber
